Motorized ball valve DN32 (1¼")
Motorized water valve for automatic water flow control in pool automation systems. Powered by DC 9–24V, wiring mode CR303. Connects to bypass fittings via a 1¼" thread and allows full water flow for 32mm pool hoses.
09.12.2025
Stay informed. If you are interested in this product, set up alerts for updates and availability.
Popis
The default position with no contact engaged is CLOSED.
When the contact is engaged, the valve opens. At the end of travel, the motor uses its own logic and limit switches, allowing it to remain continuously powered. The motor activates only when switching positions. Equipped with a waterproof SP13 3-pin connector for SUNREG control units.
Specifications:
- Valve body: 1-way internal thread BSP 1¼" DN32, UPVC
- Actuator: motorized
- Rated voltage: AC/DC 9–12V, operating current ≤500mA
- Opening/closing time: ≤7s
- Service life: minimum 70,000 cycles
- Maximum torque: 3Nm
- Cable length: 0.5m
- Maximum working pressure: 1.0 MPa
- Ambient temperature: -15℃ to 50℃
- Fluid temperature: 5℃ to 55℃
- Actuator material: engineering plastics
- Sealing material: KFM and PTFE
- Actuator rotation: 90 degrees
- Protection rating: IP67
- Manual control and indicator window included
