{header}

AUTO Menu

In automatic mode you don’t have to think about anything. SUNREG takes care of everything for you. When daylight appears and the sun starts shining, or when the start time is reached, it begins a symphony of harvesting maximum heat from the sun. It learns the length of your water circuit, the optimal light conditions, and once the water reaches the desired temperature, it sends you a notification that the pool is ready.

Pool temp
Pool temperature
15 - 39°C
Set the desired pool water temperature. SUNREG will try to reach the target temperature as efficiently as possible. Once reached, the pump and heating will stop to avoid overheating. The system will periodically check the temperature based on the RCHK time.
27°C
Filtration
Filtration activation
on/off
Here you can choose whether the filtration should start after swimming. The duration of the filtration cycle is configured in the Settings menu.
off
DayLight
Light level setting
0–100%
If the system is configured to start based on light level (LDR) in Start cond, set the appropriate trigger level between 0–100%. Make sure the sensor is not covered during adjustment so it can correctly detect current light conditions.
70%
System status
System status
Displays current operating and communication parameters. Wi‑Fi status and value publication status.
Exit MENU
Exit menu
Returns to the main screen. Exit is also performed automatically on any item if you forget to leave the menu.
Manual AUTO MAN SETTINGS