{header}

Settings Menu

Start cond
Start condition
06:00-20:00/LDR
Sets how SUNREG starts. If the unit is installed indoors, use a specific time. If the time is set to 00:00, SUNREG switches to fully automatic mode using the LDR (photoresistor).
LDR
Pool circ
Pool circuit length
0-4min
Sets the time needed for water to reach the sensor from the pool. SUNREG may adjust this value automatically based on local conditions.
15sec
Heat circ
Heating circuit length
0-4min
Sets the time needed for heated water to reach the temperature sensor. This value is set automatically but can be adjusted if necessary.
30sec
Filtr setting
Filtration time settings
0-24h 1-12h
Sets when and for how long filtration runs in AUTO mode. Default is start at 18:00 for 6 hours. Adjust according to pool size and your experience. Filtration requires Filtration on in the AUTO menu. If filtration overlaps with heating conditions, filtration stops and heating begins.
20:00, 6h
RCHK time
Temperature check interval
0-60min
When the pool is heated, SUNREG performs periodic temperature checks using a short circulation cycle.
30min
Wi-Fi
Wi-Fi settings
on/off/reset
Configures Wi-Fi connectivity for monitoring data via the app.
off
Date/Time
Date and time
Y-m-d H:M
Sets the current date and time used for device scheduling.
date/time
Disp sleep
Display backlight sleep
0-60min
To prevent SUNREG from glowing at night, you can set a timeout after which the display goes to sleep. The display can be woken up with a short press of any button. It also wakes automatically during important operations.
5min
Firmwr upgr
Firmware upgrade
on/off
Configures whether SUNREG firmware updates are performed automatically or disabled. When enabled, the unit checks for a newer firmware version at every startup (if connected to the internet) and upgrades automatically when available (OTA). If this option is disabled, simply enable it and perform a Restart to trigger the update.
on
System overview
System status
Displays current operating and communication parameters. Wi‑Fi status and value publication status.
Factory reset
Factory reset
Yes/No
Resets all adjustable system values back to their factory defaults.
No
Restart
Restart device
Performs a device restart identical to pressing the Reset button on the main board or disconnecting and reconnecting the controller.
Exit MENU
Exit menu
Closes the menu and returns to the main screen. If left open, the system will exit automatically after a timeout.
Manual AUTO MAN SETTINGS